面向快速响应的赛汝生产系统构建模型与方法

湛荣鑫; 李冬妮; 马涛; 李俊杰; 吴延昭; 殷勇

doi:10.16383/j.aas.c190731

面向快速响应的赛汝生产系统构建模型与方法

doi: 10.16383/j.aas.c190731

湛荣鑫^1,,
李冬妮^1,,
马涛^2,,
李俊杰^2,,
吴延昭^2,,
殷勇^3,

1.
北京理工大学计算机学院智能信息技术北京市重点实验室北京 100081 中国
2.
内蒙古第一机械集团有限公司包头 014000 中国
3.
同志社大学商学院京都 201101 日本

基金项目: 内蒙古自治区重大基础研究开放课题 (GZ2018KF001), 国家自然科学基金 (61763046) 资助

详细信息

作者简介:
湛荣鑫：北京理工大学计算机学院博士研究生. 主要研究方向为赛汝生产与智能优化. E-mail: bitzrx@163.com

李冬妮：北京理工大学计算机学院教授. 主要研究方向为智能优化与仿真计算, 智能制造及数字孪生. 本文通信作者. E-mail: ldn@bit.edu.cn

马涛：研究员级高级工程师, 特种车辆及其传动系统智能制造国家重点实验室副主任. 主要研究方向为数字化及智能制造应用基础技术.E-mail: matao@nmgyj.com

李俊杰：内蒙古第一机械集团有限公司研究员级高级工程师. 主要研究方向为车辆动力辅助系统和自动装填系统工艺技术.E-mail: 13337199371@163.com

吴延昭：内蒙古第一机械集团有限公司高级工程师. 主要研究方向为冲压自动化, 智能化生产.E-mail: wuyanzhaolishiqi@126.com

殷勇：日本同志社大学商学院教授. 主要研究方向为赛汝生产与工业4.0.E-mail: yyin@mail.doshisha.ac.jp

计量
- 文章访问数: 522
- HTML全文浏览量: 122
- PDF下载量: 140
- 被引次数: 0
出版历程
- 收稿日期: 2019-10-22
- 录用日期: 2020-04-06
- 网络出版日期: 2022-11-23
- 刊出日期: 2022-12-23

Configuration Model and Approach of a Seru Production System for Quick Response

ZHAN Rong-Xin^1
,,
LI Dong-Ni^1
,,
MA Tao^2
,,
LI Jun-Jie^2
,,
WU Yan-Zhao^2
,,
YIN Yong^3
,

1.
Beijing Laboratory of Intelligent Information Technology, School of Computer Science, Beijing Institute of Technology, Beijing 100081, China
2.
Inner Mongolia First Machinery Group Co., Ltd., Baotou 014000, China
3.
Graduate School of Business, Doshisha University, Kyoto 201101, Japan

Funds: Supported by Major Basic Research and Open Project of the Inner Mongolia Autonomous Region (GZ2018KF001) and National Natural Science Foundation of China (61763046)

More Information

Author Bio:
ZHAN Rong-Xin　Ph.D. candidate at the School of Computer Science, Beijing Institute of Technology. His research interest covers Seru production and intelligent optimization

LI Dong-Ni　Professor at the School of Computer Science, Beijing Institute of Technology. Her research interest covers intelligent optimization and simulation, smart factory and digital twin. Corresponding author of this paper

MA Tao　Senior engineer in research fellow level, and associate director of the State Key Laboratory of Smart Manufacturing for Special Vehicles and Transmission Systems. His research interest covers basic technology for digital and intelligent manufacturing applications

LI Jun-Jie　Senior engineer in research fellow level at Inner Mongolia First Machinery Group Co., Ltd.. His research interest covers vehicle power assist system and technology of automatic loading system

WU Yan-Zhao　Senior engineer at Inner Mongolia First Machinery Group Co., Ltd.. His research interest covers stamping automation and intelligent production

YIN Yong　Professor at the Graduate School of Business, Doshisha University, Japan. His research interest covers Seru production and Industry 4.0

摘要

摘要: 当前市场环境具有多品种、变批量、产品生命周期短的波动特点, 赛汝生产系统(Seru production system, SPS)是一种目前广泛应用于电子制造行业的新型生产方式, 其具有优良的重构性和响应能力, 适合于应对波动市场环境. 本文提出了一个两阶段的赛汝生产系统构建问题模型, 两个阶段分别是Seru构建和Seru调度, 并证明了这两个问题模型均是NP难的, 结合模型分析给出了相应的精确/近似算法. 实验结果表明, 在波动市场环境下按照本文模型与方法构建出的赛汝生产系统其工人利用率始终保持在较高水平, 系统具有较强的重构性能和响应能力.
- 赛汝生产系统 /
- 响应能力 /
- 重构性 /
- 波动市场
Abstract: Variable product types, fluctuating production volumes, and short product life cycles are the main characteristics of the current market environment. Seru production system, which has excellent reconfigurability and responsiveness, has been widely used in electronic manufacturing industry. A two-stage model of configuring a Seru production system is proposed in this paper. The complexity and property of the model is analyzed and related exact or approximation algorithms are given. The computational result shows that the configured Seru production systems have high level performance of utilization and reveal strong reconfigurability and responsiveness.
- Seru production system (SPS) /
- responsiveness /
- reconfigurability /
- volatile markets

HTML全文

图 1 订单1的潜在加工路径${E_1}$

Fig. 1 Potential processing paths ${E_1}$ for order 1

下载: 全尺寸图片幻灯片

图 2 为订单1和2所构建的4个Seru甘特图

Fig. 2 Gantt chart for 4 Serus

下载: 全尺寸图片幻灯片

图 3 Seru数目随产品类型级别变化趋势

Fig. 3 The number of Serus versus product types

下载: 全尺寸图片幻灯片

图 4 工人利用率随产品类型级别变化趋势

Fig. 4 The utilization of workers versus product types

下载: 全尺寸图片幻灯片

图 5 订单最大完工时间随产品类型级别变化趋势

Fig. 5 The makespan versus product types

下载: 全尺寸图片幻灯片

图 6 Seru数目随订单需求量变化趋势

Fig. 6 The number of Serus versus product volumes

下载: 全尺寸图片幻灯片

图 7 工人利用率随订单需求量变化趋势

Fig. 7 The utilization of workers versus product types

下载: 全尺寸图片幻灯片

图 8 工人利用率随市场波动变化趋势

Fig. 8 The utilization of workers versus cf levels

下载: 全尺寸图片幻灯片

表 1 波动市场的参数描述

Table 1 Parameters of volatile markets

参数	取值范围
产品类型级别 (k)	1, 3, 5, 7, 9
产品类型生成方式	$\sim {\rm{U} }[1,k]$
产品需求量均值 (μ)	10, 20, 30, 40, 50
产品需求量波动系数 (cf)	0. 1, 0. 3, 0. 5, 0. 7, 0. 9
产品需求量生成方式	~N[μ, (μ × cf)²]

下载: 导出CSV

表 2 算例的其余参数描述

Table 2 Parameters of test problems

算例参数	取值范围
SPS工人数量	15
工人初始剩余工作时间	1500
工人在任一工序上的单位加工时间	$\sim {\rm{U}}[8,12]$, 向下取整
订单数量	$\sim {\rm{U}}[5,15]$, 向下取整
相邻到来订单的时间间隔	$\sim {\rm{E}} (1/30)$

下载: 导出CSV

表 3 工人在不同工序上的单位加工时间

Table 3 Processing time of each worker on different operations

工人/工序	工序 1	工序 2	工序 3	工序 4	工序 5
工人 1	10	—	—	—	9
工人 2	8	10	—	—	—
工人 3	—	12	8	—	—
工人 4	—	—	9	9	—
工人 5	—	—	—	11	12

下载: 导出CSV

表 4 订单信息

Table 4 The information of orders

订单	到来时间	产品类型 (所需工序标号集合)	需求量
订单 1	0	{1, 2}	15
订单 2	40	{3, 4, 5}	11

下载: 导出CSV

表 5 为生产3个订单所构建的Seru展示

Table 5 Serus that are configured for orders

订单	订单1		订单2
Seru	Seru 1	Seru 2	Seru 3	Seru 4
工序 1	工人 2	工人 1	—	—
工序 2	工人 2	工人 3	—	—
工序 3	—	—	工人 3	工人 4
工序 4	—	—	工人 4	工人 4
工序 5	—	—	工人 5	工人 5
产品产出量	11	4	9	2
存在时长	198	58	125	48

下载: 导出CSV

参考文献(29)

[1]	Yokoi K. Yokoi Style of Sales. Akashi City: Pencom Publication, 2014. (in Japanese)
[2]	Yin Y, Stecke K E, Swink M, Kaku I. Lessons from seru production on manufacturing competitively in a high cost environment. Journal of Operations Management, 2017, 49-51(1): 67-76 doi: 10.1016/j.jom.2017.01.003
[3]	Gong J J, Irikura N, Suzuki S. New product development operational performance and its influential factors: Cross-national comparison between Japan and China. Asian Journal of Management Science and Applications, 2014, 1(3): 237-260
[4]	Kambara H. Outsourcing and performance in Japanese manufacturing firms. Asian Journal of Management Science and Applications, 2016, 2(4): 376-393
[5]	Wang J W, Dou R L, Muddada R R, Zhang W J. Management of a holistic supply chain network for proactive resilience: Theory and case study. Computers & Industrial Engineering, 2018, 125: 668-677
[6]	Stecke K E, Yin Y, Kaku I, Murase Y. Seru: The organizational extension of JIT for a super-talent factory. International Journal of Strategic Decision Sciences, 2012, 3(1): 106-119 doi: 10.4018/jsds.2012010104
[7]	Yin Y, Kaku I, Stecke K E. The Evolution of Seru Production Systems Throughout Canon. Edinburgh: NeilsonJournals Publishing, 2008.
[8]	Yin Y, Stecke K E, Swink M, Kaku, I. Integrating Lean and Agile Production Paradigms in a Highly Volatile Environment with Seru Production Systems: Sony and Canon Case Studies. Yamagata University, Yamagata, Japan, 2012.
[9]	Yin Y, Stecke K E, Li D N. The evolution of production systems from industry 2.0 through industry 4.0. International Journal of Production Research, 2018, 56(1-2): 848-861 doi: 10.1080/00207543.2017.1403664
[10]	Stecke K E, Yin Y, Kaku I. Seru production: An extension of just-in-time approach for volatile business environments. Analytical Approaches to Strategic Decision-Making: Interdisciplinary Considerations. Hershey: Business Science Reference, 2014. 45−58
[11]	Zhang X L, Liu C G, Li W J, Evans S, Yin Y. Effects of key enabling technologies for seru production on sustainable performance. Omega, 2017, 66: 290-307 doi: 10.1016/j.omega.2016.01.013
[12]	Yu Y, Tang J F. Review of seru production. Frontiers of Engineering Management, 2019, 6(2): 183-192 doi: 10.1007/s42524-019-0028-1
[13]	于洋, 唐加福. Seru生产方式. 北京: 科学出版社, 2018. Yu Yang, Tang Jian-Fu. Seru Production Mode. Beijing: Science Press, 2018.
[14]	Yu Y, Wang J W, Ma K, Sun W. Seru system balancing: Definition, formulation, and exact solution. Computers & Industrial Engineering, 2018, 122: 318-325
[15]	吴旭辉, 杜劭峰, 郝慧慧, 于洋, 殷勇, 李冬妮. 一种基于协同进化的流水线向Seru系统转化方法. 自动化学报, 2018, 44(6): 1015-1027 Wu Xu-Hui, Du Shao-Feng, Hao Hui-Hui, Yu Yang, Yin Yong, Li Dong-Ni. A line-seru conversion approach by means of cooperative coevolution. Acta Automatica Sinica, 2018, 44(6): 1015-1027
[16]	Liu C G, Stecke K E, Lian J, Yin Y. An implementation framework for seru production. International Transactions in Operational Research, 2014, 21(1): 1-19 doi: 10.1111/itor.12014
[17]	Liu C G, Li W J, Lian J, Yin Y. Reconfiguration of assembly systems: From conveyor assembly line to serus. Journal of Manufacturing Systems, 2012, 31(3): 312-325 doi: 10.1016/j.jmsy.2012.02.003
[18]	Yu Y, Gong J, Tang J F, Yin Y, Kaku I. How to carry out assembly line–cell conversion? A discussion based on factor analysis of system performance improvements. International Journal of Production Research, 2012, 50(18): 5259-5280 doi: 10.1080/00207543.2012.693642
[19]	Yu Y, Tang J F, Sun W, Yin Y, Kaku I. Combining local search into non-dominated sorting for multi-objective line-cell conversion problem. International Journal of Computer Integrated Manufacturing, 2013, 26(4): 316-326 doi: 10.1080/0951192X.2012.717717
[20]	Yu Y, Tang J F, Sun W, Yin Y, Kaku I. Reducing worker(s) by converting assembly line into a pure cell system. International Journal of Production Economics, 2013, 145(2): 799-806 doi: 10.1016/j.ijpe.2013.06.009
[21]	Yu Y, Sun W, Tang J F, Kaku I, Wang J W. Line-seru conversion towards reducing worker(s) without increasing makespan: Models, exact and meta-heuristic solutions. International Journal of Production Research, 2017, 55(10): 2990-3007 doi: 10.1080/00207543.2017.1284359
[22]	Liu C G, Yang N, Li W J, Lian J, Evans S, Yin Y. Training and assignment of multi-skilled workers for implementing seru production systems. The International Journal of Advanced Manufacturing Technology, 2013, 69(5-8): 937-959 doi: 10.1007/s00170-013-5027-5
[23]	Liu C G, Dang F, Li W J, Lian J, Evans S, Yin Y. Production planning of multi-stage multi-option seru production systems with sustainable measures. Journal of Cleaner Production, 2015, 105: 285-299 doi: 10.1016/j.jclepro.2014.03.033
[24]	Lian J, Liu C G, Li W J, Yin Y. A multi-skilled worker assignment problem in seru production systems considering the worker heterogeneity. Computers & Industrial Engineering, 2018, 118: 366-382
[25]	Wang Y, Tang J F. Is full skill the best configuration for Seru production system? In: Proceedings of the 2018 Chinese Control and Decision Conference (CCDC). Shenyang, China: IEEE, 2018.
[26]	Wang Y, Tang J F. Cost and service-level-based model for a seru production system formation problem with uncertain demand. Journal of Systems Science and Systems Engineering, 2018, 27(4): 519-537 doi: 10.1007/s11518-018-5379-3
[27]	Chopra S, Rao M R. The partition problem. Mathematical Programming, 1993, 59(1-3): 87-115 doi: 10.1007/BF01581239
[28]	Jordan W C, Graves S C. Principles on the benefits of manufacturing process flexibility. Management Science, 1995, 41(4): 577-594 doi: 10.1287/mnsc.41.4.577
[29]	Aczel A, Sounderpandian J. Complete Business Statistics. (7th edition). New York: McGraw-Hill Companies, 2008.