[1]
|
Bialkowski W L. Dreams versus reality: a view from both sides of the gap: manufacturing excellence with come only through engineering excellence. Pulp and Paper-Canada, 1993, 94(11): 19-27[2] Ender D B. Process control performance: not as good as you think. Control Engineering, 1993, 9(10): 180-190[3] Harris T J. Assessment of control loop performance. The Canadian Journal of Chemical Engineering, 1989, 67(5): 856-861[4] Xu F W, Lee K H, Huang B. Monitoring control performance via structured closed-loop response subject to output variance/covariance upper bound. Journal of Process Control, 2006, 16(9): 971-984[5] Wang X, Huang B, Chen T. Multirate minimum variance control design and control performance assessment: a data-driven subspace approach. IEEE Transactions on Control Systems Technology, 2007, 15(1): 65-74[6] Olaleye F, Huang B, Tamayo E. Performance assessment of control loops with time-variant disturbance dynamics. Journal of Process Control, 2004, 14(8): 867-877[7] McNabb C A, Qin S J. Projection based MIMO control performance monitoring: I-covariance monitoring in state space. Journal of Process Control, 2003, 13(8): 739-757[8] Zhao Y, Su H Y, Chu J, Gu Y. Multivariable control performance assessment based on generalized minimum variance benchmark. Chinese Journal of Chemical Engineering, 2010, 18(1): 86-94[9] Bjrklund S. A Survey and Comparison of Time-Delay Estimation Methods in Linear Systems [Ph.D. dissertation], Division of Automatic Control, Department of Electrical Engineering, Linkping University, Sweden, 2003[10] Bezergiannj S, Georgakis C. Evaluation of controller performance —— use of models derived by subspace identification. International Journal of Adaptive Control and Signal Processing, 2003, 17(7-9): 527-552[11] Yu J, Qin S J. MIMO control performance monitoring using left/right diagonal interactors. Journal of Process Control, 2009, 19(8): 1267-1276[12] Xu F W, Huang B, Tamayo E C. Performance assessment of MIMO control systems with time-variant disturbance dynamics. Computers and Chemical Engineering, 2008, 32(9): 2144-2154
|