[1]
|
Hsu C C, Su C T. An adaptive forecast-based chart for non-Gaussian processes monitoring: with application to equipment malfunctions detection in a thermal power plant. IEEE Transactions on Control Systems Technology, 2011, 19(5): 1245-1250
|
[2]
|
[2] Samara P A, Fouskitakis G N, Sakellariou J S, Fassois S D. A statistical method for the detection of sensor abrupt faults in aircraft control systems. IEEE Transactions on Control Systems Technology, 2008, 16(4): 789-798
|
[3]
|
[3] Zhao C H, Wang F L, Lu N Y, Jia M X. Stage-based soft-transition multiple PCA modeling and on-line monitoring strategy for batch processes. Journal of Process Control, 2007, 17(9): 728-741
|
[4]
|
[4] Qin S J. Statistical process monitoring: basics and beyond. Journal of Chemometrics, 2003, 17(8-9): 480-502
|
[5]
|
[5] Qian C, Kruger U. Analysis of extended partial least squares for monitoring large-scale processes. IEEE Transactions on Control Systems Technology, 2005, 13(5): 807-813
|
[6]
|
[6] Ayhan B, Mo Y C, Myung H S. Multiple discriminant analysis and neural-network-based monolith and partition fault-detection schemes for broken rotor bar in induction motors. IEEE Transactions on Industrial Electronics, 2006, 53(4): 1298-1308
|
[7]
|
[7] Kruger U, Kumar S, Littler T. Improved principal component monitoring using the local approach. Automatica, 2007, 43(9): 1532-1542
|
[8]
|
[8] Alcala C F, Qin S J. Reconstruction-based contribution for process monitoring. Automatica, 2009, 45(7): 1593-1600
|
[9]
|
[9] Zhao C H, Wang F L, Gao F R, Lu N Y, Jia M X. Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data. Industrial and Engineering Chemistry Research, 2007, 46(14): 4943- 4953
|
[10]
|
Zhao C H, Gao F R, Wang F L. Phase-based joint modeling and spectroscopy analysis for batch processes monitoring. Industrial and Engineering Chemistry Research, 2010, 49(2): 669-681
|
[11]
|
Wold S, Esbensen K, Geladi P. Principal component analysis. Chemometrics and Intelligent Laboratory Systems, 1987, 2(1-3): 37-52
|
[12]
|
Burnham A J, Viveros R, MacGregor J F. Frameworks for latent variable multivariate regression. Journal of Chemometrics, 1996, 10(1): 31-45
|
[13]
|
Dayal B S, MacGregor J F. Improved PLS algorithms. Journal of Chemometrics, 1997, 11(1): 73-85
|
[14]
|
Raich A, Cinar A. Statistical process monitoring and disturbance diagnosis in multivariable continuous processes. AIChE Journal, 1996, 42(4): 995-1009
|
[15]
|
Yoon S, MacGregor J F. Fault diagnosis with multivariate statistical models part I: Using steady state fault signatures. Journal of Process Control, 2001, 11(4): 387-400
|
[16]
|
Kano M, Hasebe S, Hashimoto I, Ohno H. Statistical process monitoring based on dissimilarity of process data. AIChE Journal, 2002, 48(6): 1231-1240
|
[17]
|
Qin S J, Li W H. Detection and identification of faulty sensors in dynamic processes. AIChE Journal, 2001, 47(7): 1581 -1593
|
[18]
|
Dunia R, Qin S J. Subspace approach to multidimensional fault identification and reconstruction. AIChE Journal, 1998, 44(8): 1813-1831
|
[19]
|
Yue H H, Qin S J. Reconstruction-based fault identification using a combined index. Industrial and Engineering Chemistry Research, 2001, 40(20): 4403-4414
|
[20]
|
Valle S, Qin S J, Piovoso M J. Extracting fault subspaces for fault identification of a polyester film process. In: Proceedings of the 2001 IEEE American Control Conference. Arlington, VA, USA: IEEE, 2001. 4466-4471
|
[21]
|
Lieftucht D, Volker M, Sonntag C, Kruger U, Irwin G W, Engell S. Improved fault diagnosis in multivariate systems using regression-based reconstruction. Control Engineering Practice, 2009, 17(4): 478-493
|
[22]
|
Gang L, Alcala C F, Qin S J, Zhou D H. Generalized reconstruction-based contributions for output-relevant fault diagnosis with application to the Tennessee Eastman process. IEEE Transactions on Control Systems Technology, 2011, 19(5): 1114-1127
|
[23]
|
Zhao C H, Wang F L, Mao Z Z, Lu N Y, Jia M X. Quality prediction based on phase-specific average trajectory for batch processes. AIChE Journal, 2008, 54(3): 693-705
|
[24]
|
Downs J J, Vogel E F. A plant-wide industrial process control problem. Computers and Chemical Engineering, 1993, 17(3): 245-255
|